Trubolt Seismic Wedge Anchor 1/2" x 3 3/4"

Box of 25

The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification.

Use carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994 to install anchors.

Anchors tested to ASTM E488 criteria and listed by ICC (formerly ICBO). Anchors are listed by the following agencies as required by the local building code: UL, FM, City of Los Angeles, California State Fire Marshal and Caltrans.

Anchor diameter equals hole diameter
One piece stainless steel expander clip resists corrosion
360 degree contact with concrete assures full expansion for reliable working loads
Non bottom-bearing, may be used in hole depth exceeding anchor length
Can be installed through the work fixture, eliminating hole spotting
Inspectable torque values, indicating proper installation

Trubolt’s fully threaded feature eliminates subsurface obstruction problems.

Fully threaded design accommodates various material thicknesses at the same embedment. One anchor length saves time and money.